UNIVERSAL JOINT
Pressed Steel. For steering columns, gear linkages. One end has the popular 36 x 9/16” female spline and the other end will accept a 19mm (3/4”) hex shaft. Overall length 115mm. A shaft can be welded to either end if most of the joint is immersed in a bucket of water to sink away the heat.

STEERING COLUMN LINK
400mm long. 15mm diameter shaft. Has a staked UJ at one end and a spline at the other. Matches our UJs below.
Easy to extend or shorten with a welded sleeve.

UNIVERSAL JOINT
Compact and strong needle roller joint for steering columns.
Accepts 14mm x 36 spline. Size 80mm x 38mm. 8mm pinch bolts. Forged version only available.

UNIVERSAL JOINT

We use these on our Porsche, ZF and Renault linkages and it is such a good quality product that we had to include it in our range. Don't confuse this with similar, cheaper UJ's - ours has hardened steel bushes and is precision manufactured for strength, low friction, accuracy and long life. Only 22mm diameter. Each end is undrilled so you can drill yourself for welding into your choice of rod diameter or we will be happy to drill them for you.

SPLINED SHAFT for STEERING COLUMN

Can be cut and welded to fabricate your own steering column link. Made from 15mm diameter steel. Has a 9/16 in diameter x 36 spline machined on one end. 250mm Long. Fits our steering UJ.