Car Builder Solutions Ltd - rubber and chrome trim

THIS IS A SMALL SELECTION OF OUR TRIM PRODUCTS.
PLEASE SEE OUR MAIN CATALOGUE FOR THE FULL RANGE

RUBBER & CHROME TRIM & FLOORMAT

CHROME PLASTIC EDGE TRIM Can be formed around gentle curves. 2 sizes 5mm x 3mm for panels up to 1.5mm. 12mm x 5mm for panels up to 3mm.	DOOR SEAL Suitable for GRP panels. Sponge tube 17mm diameter bonded to steel-reinforced PVC gripper. Max panel thickness 5mm.	SELF-ADHESIVE FOAM BLACK RUBBER 19mm X 3mm. 25mm x 6mm.

RUBBER MATTING Black, low profile wide flutes for easy cleaning. 3mm thick.	EDGE TRIM Herringbone embossed PVC with steel reinforcing. Max panel thickness 5mm channel depth 10mm.	NEOPRENE 'D' SECTION Will deform nicely to take up variable panel gaps or form drip gutters. Size: Base 14mm, Height 10mm.

MINI EDGE TRIM Herringbone embossed PVC with steel reinforcing. Max panel thickness 2.5mm channel depth 7.5mm. Tight radii in any direction.

TANK STRAP RUBBER 30mm x 7mm hard black rubber channel. Will accept 20mm steel strip.

NEW SMALL HOLLOW 'D' SECTION Black Neoprene skinned sponge. 10mm across the base x 8mm high. Can be glued on as a boot or bonnet seal.

EDGE SEAL Black rubber. For boot edge lips etc.. Overall 19mm high. 9mm diameter soft round bead. For up to 3mm thick panels. Steel reinforced 'U'.

RUBBER 'U' CHANNEL Perfect for edging aluminium, steel or GRP panels or lining hole edges through bulkheads. Can be glued on with our Polyurethane or Contact Adhesive Three sizes: 7mm x 4mm for 1mm panels. 10mm x 5mm for 2mm panels. 13mm x 7mm for 3mm panels.

BOOT & DOOR SEAL Small - 28mm total height for up to 3mm panels. Large - 42mm total height for up to 5mm panels.
WING PIPING Black PVC. Moulded wing piping. Use in the traditional way between bolt-on wings and body to make a neat, sealed joint. Or, as a finishing trim around the edges of aluminium panels. 4.5mm diameter bead. 25mm long tail x 1.3mm thick.

NEW SIZE CHROME TRIM SELF ADHESIVE Very flexible flattened oval plastic wrap-around chrome trim. Will form to tight radii in both directions. Size 8mm x 3mm.

EDGE SEAL (above right) New, eared bead for extra sealing capability. 'U' section has leathergrain finish and fits over up to 5mm panels. Channel depth 12mm Bead diameter 17mm. DOOR SEAL (above left) New, eared bead for extra sealing capacity. 'U' section has leathergrain finish and fits over up to 5mm panels. Channel depth 15mm. Bead diameter 17mm.

CHROME SELF ADHESIVE STRIP (top left) 21mm x 3mm. Hard rubber skinned with chrome cover. Strong adhesive with peel-off backing. Beautiful mirror finish. Very nice indeed. NEOPRENE 'D' SECTION SELF-ADHESIVE SEAL (middle left) Soft, skinned sponge. Strong adhesive with peel-off backing. 3 sizes: 8mm x 6mm 10mm x 7mm 14mm x 13mm GLOSS BLACK or CHROME SELF ADHESIVE TRIM (bottom left) 13mm x 3.3mm Hard rubber skinned in glossy black or chrome. Can be formed to 60mm radius in it's flat plane. Strong adhesive with peel-off backing. GLOSS BLACK YELLOW/BLACK CHROME U CHANNEL (top 3, right hand side) 8mm x 5.5mm Very nice trim that will curve without distortion in both directions as tight as 50mm radius. Hard rubber skinned with laminate. Will fit over 1mm to 4mm panels. A brilliant feature is a fillet of non-setting adhesive at the bottom of the 'U' to make sure it stays firmly in place. CHROME SELF ADHESIVE STRIP (bottom right) 5mm x 2mm Hard rubber skinned in hard wearing chrome. Very Flexible in both directions.

SELF ADHESIVE RIBBED NEOPRENE SPONGE STRIP Soft, skinned closed cell sponge. Ideal for bonnet and boot shuts or panel to panel joints. Three sizes: 10mm x 4mm (left). 15mm x 4mm (centre). 15mm x 8mm (right).
Back to Products Page \| CBS Products Home